Getting started
VQT4C69
20
Settings
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [
Í
] on the remote control or [
Í
/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen
appears, the setting information on the TV
is acquired by this unit. (
>
74)
• When the Auto Setup screen appears, the
unit searches for the terrestrial digital
channels. It takes about 3 minutes.
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
>
92, Clock).
4
Set “Power Save” to “On”, “On Timer” or
“Off”, then press [OK].
• On
It will go into the Power Save in Standby
mode.
• On Timer
Set the start and stop time and then press
[OK].
• “Power Save in Standby” is activated
when the set time comes.
• Off
It is possible to start quickly from standby
mode. (Quick Start mode)
• If you use Home Network function (
>
90),
select “Off”. This function is not available
with other settings.
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
To stop partway
Press [RETURN
].
To restart setup
1 Press [SETUP]. (
>
19)
2 Select “Auto Setup” in “Digital TV Tuning”,
then press [OK].
3 Select “Yes”, then press [OK].
If the TV aspect setting screen appears
Refer to “TV Aspect”. (
>
88)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (
>
24)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Easy Setting
Progress
Digital TV Auto Tuning
CH 21
69
RF Ch
Digital TV: 2
Radio: 0
Searching
Quality
Type
Channel Name
RETURN
This will take about 3 minutes.
35
10
10
35
Digital TV
Digital TV
Power Save in Standby
From
To
Power Save
On
0
6
DMRBWT720GZ_eng.book 20 ページ ２０１２年２月２８日 火曜日 午後１時１５分
