Panasonic DCGH5SGNK Operating Instructions For Advanced Features Download

Page: 80 / 385

3. Recording Modes

∫

Setting the position and size of the light source ([Sunshine])

Press

to display the setting screen.

• Setting screen can also be displayed by touching in order of [

] then [

Press

to move the centre position of the light source.

• The position of the light source can also be moved by touching the screen.

Adjust the size of the light source by rotating the
rear dial.

• The display can also be enlarged/reduced by pinching out/pinching in.
• To reset the light source setting to the default, press [DISP.].

Press [MENU/SET] to set.

Press [

Rotate the rear dial to set.

• To return to the recording screen, press [

] again.

Point for when placing the centre of the light

source

A more natural appearance can be created by placing
the centre of the light source outside the image.

Adjust the effect to fit your preferences

Image effect

Items that can be set

[Expressive]

Freshness

Understated colours

Pop colours

[Retro]

Colour

Yellowish tinge

Reddish tinge

[Old Days]

Contrast

Low contrast

High contrast

[High Key]

Colour

Pinkish tinge

Aquamarinish tinge

[Low Key]

Colour

Reddish tinge

Bluish tinge

[Sepia]

Contrast

Low contrast

High contrast

Summary of Contents for DCGH5SGNK


































































































































































































































































































































































































Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands

Panasonic DCGH5SGNK, Operating Instructions For Advanced Features

Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands