Panasonic DCGH5SGNK Operating Instructions For Advanced Features Download

Page: 290 / 385

10. Using the Wi-Fi/Bluetooth function

290

Connecting with a password further enhances security. You can scan a QR code or
manually enter a password to set up a connection.

Preparations: (On the camera)

∫

Using the QR code to set up a connection

SSID and password

QR code

• When the camera is ready to be connected to the smartphone,

the QR code, SSID and password are displayed.

• You can also display the information by pressing [Wi-Fi] on the

camera.

Start “Image App”.

Select [QR code].

• When the smartphone is connected to a wireless access point, it may take time to display

[QR code].

• (For iOS devices) A confirmation screen will be displayed. Select [OK] to proceed.

Use the “Image App” to scan the QR code displayed on the screen of the
camera.

• To enlarge the QR code, press [MENU/SET] on the camera.

Install the profile.

• If a pass code is set on the smartphone, you need to enter it.

Press the home button to close the browser.

Turn on the Wi-Fi function in the smartphone’s setting menu.

On the Wi-Fi setting screen, select the SSID displayed on
the camera.

Press the home button, and select “Image App” to display
“Image App”.

• (iOS devices) Steps

through

are not required from the second

time on.

Using a password to set up a connection

[Setup]

[Wi-Fi]

[Wi-Fi Setup]

[Wi-Fi Password]

[ON]

On the camera

[Setup]

[Wi-Fi]

[Wi-Fi Function]

[New Connection]

[Remote Shooting &

View]

On your smartphone

If you are using an Android device, follow the steps up to here to complete the setup.
Proceed to the steps below only if you are using an iOS device (iPhone/iPod touch/iPad).

Wi-Fi

0123456789ABC

Summary of Contents for DCGH5SGNK


































































































































































































































































































































































































Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands

Panasonic DCGH5SGNK, Operating Instructions For Advanced Features

Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands