Panasonic DCGH5SGNK Operating Instructions For Advanced Features Download

Page: 229 / 385

229

9. Using Menu Functions

Applicable modes:

The camera raises the resolution by correcting the blurriness caused by diffraction when
the aperture is closed.

Settings: [AUTO]/[OFF]

Applicable modes:

Disables operational sounds and output of light at once.

Settings: [ON]/[OFF]

• Audio from the speaker will be muted and the flash and the AF Assist lamp will be disabled.

The following settings are fixed.
– [Flash Mode]: [

] (forced flash off)

– [Shutter Type]: [ESHTR]
– [AF Assist Lamp]: [OFF]
– [Beep Volume]: [

] (OFF)

– [E-Shutter Vol]: [

] (OFF)

[Diffraction Compensation]

[Rec]

[Diffraction Compensation]

• Compensation effect may not be achieved depending on the recording conditions.
• Noise may stand out with higher ISO sensitivity.

[Silent Mode]

[Rec]

[Silent Mode]

• Even when [ON] is set, the following functions light up/flash.

– Status indicator
– Self-timer indicator
– WIRELESS connection lamp

• Sounds that are produced by the camera regardless of your operations, such as the lens

aperture sound, cannot be muted.

• Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject

when you use this function. Use at your own risk.

Summary of Contents for DCGH5SGNK


































































































































































































































































































































































































Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands

Panasonic DCGH5SGNK, Operating Instructions For Advanced Features

Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands