Panasonic DCGH5SGNK Operating Instructions For Advanced Features Download

Page: 108 / 385

4. Focus, Brightness (Exposure) and Colour tone Settings

108

Setting the Light Sensitivity

Applicable modes:

This allows the sensitivity to light (ISO sensitivity) to be set.

Press [

Select the ISO sensitivity by rotating the rear
dial.

• You can switch the functions between the rear dial and

the front dial by pressing [DISP.].

[ISO Auto Upper Limit Setting]

ISO sensitivity

Rotate the front dial to set the [ISO Auto
Upper Limit Setting].

• Set the [ISO Auto Upper Limit Setting] in [ISO Sensitivity (photo)] (or in [ISO Sensitivity

(video)] when using Creative Video Mode).

• It will work when the [Sensitivity] is set to [AUTO] or [

ISO

LIMIT

AUTO

ISO

AUTO

ISO

AUTO

ISO

AUTO

AUTO

Summary of Contents for DCGH5SGNK


































































































































































































































































































































































































Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands

Panasonic DCGH5SGNK, Operating Instructions For Advanced Features

Search results

Summary of Contents for DCGH5SGNK

Reviews:

Related manuals for DCGH5SGNK

Brands by name

Popular brands