14. Menu Guide
415
Follow the steps below when the character entry screen is displayed.
1
Enter characters.
≥
Press
3421
to select characters
and then press
or
until the
character to enter is displayed.
(Repeat this)
0
To repeatedly enter the same character,
rotate
or
to the right to move
the entry position cursor.
0
If you select an item and press
or
, you can perform the following
operations:
– [
]: Change the character type to [A] (upper case characters), [a] (lower
case characters), [1] (numbers), and [&] (special characters)
– [
]
]: Enter a blank
– [Delete]: Delete a character
– [ ]: Move the entry position cursor to the left
– [ ]: Move the entry position cursor to the right
0
When entering a password,
A
shows the number of characters you have
entered and the number of characters you can enter.
2
Complete entering.
≥
Select [Set] and then press
or
.
Entering Characters
