manualshive.com logo in svg

Panasonic DC-S5, Manual, Page: 297 / 570

Share
Download
Panasonic DC-S5 Manual Download Page 297

11. Connections with External Devices (Video)

297

0

While an XLR Microphone Adaptor is attached, [

] is displayed on the 

screen.

0

When [XLR Mic Adaptor Setting] is set to [ON], the following settings are fixed:
– [Sound Rec Level Limiter]: [OFF]
– [Wind Noise Canceller]: [OFF]
– [Sound Output]: [REC SOUND]

0

[Sound Rec Level Adj.] cannot be used when [XLR Mic Adaptor Setting] is set 
to [ON].

0

When the XLR Microphone Adaptor is attached, [Sound Rec Level Disp.] 
automatically turns [ON], and the recording level is displayed on the screen.

0

When the XLR Microphone Adaptor is attached, do not carry the camera by 
holding the XLR Microphone Adaptor. It may become detached.

0

If noises are recorded when using the AC adaptor, use the battery.

0

For details, refer to the operating instructions for the XLR Microphone 
Adaptor.

Summary of Contents for DC-S5



























































































































































































































































































































































































































































































































































































Reviews:

No comments