Panasonic DC-S5 Manual Download Page 295

Page: 295 / 570

11. Connections with External Devices (Video)

295

Reduction of Wind Noise

This reduces wind noise when an external microphone is connected.

[

]

[

]

Select [Wind Cut]

Settings: [HIGH]/[STANDARD]/[LOW]/[OFF]

While the external microphone is connected, [

] is displayed on the screen.

When an external microphone is connected, [Sound Rec Level Disp.]
automatically turns [ON], and the recording level is displayed on the screen.

When the external microphone is attached, do not carry the camera by holding
the external microphone. It may become detached.

If noises are recorded when using the AC adaptor, use the battery.

Setting [Wind Cut] may alter the usual sound quality.

For details, refer to the operating instructions for the external microphone.

Summary of Contents for DC-S5



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DC-S5

Reviews:

Panasonic DC-S5, Manual, Page: 295 / 570

Search results

Summary of Contents for DC-S5

Reviews: