manualshive.com logo in svg

Panasonic DC-BS1H, Operating Instructions Manual

Share
Download
Panasonic DC-BS1H Operating Instructions Manual Download Page 75

- 75 -

- 75 -

5.  Recording settings - Focus / Zoom

 

■

Move the Position of the AF Area

  Display the AF mode selection screen.

 

●

[MENU/SET]   [ ]   [ ]   [AF Mode]

  Select [ ] and then press  .
 Press 

 to move the position of the AF area.

 

●

To return the position back to the center, press [Fn1].

  Press [MENU/SET].

[225-Area]

The camera selects the most optimal AF area to focus from 225 areas.

[Zone (Oval)]

Within the 225 AF areas, a central oval zone can be focused.

 

■

Move and Change the Size of the AF Area

  Display the AF mode selection screen.

 

●

[MENU/SET]   [ ]   [ ]   [AF Mode]

  Select [ ] and then press  .
 Press 

 to move the position of the AF area.

 Rotate   to change the size of the AF area.

 

●

The first press of [Fn1] returns the AF area position to the center. The second press returns the size of the AF area to 
the default.

  Press [MENU/SET].

Summary of Contents for DC-BS1H

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands