manualshive.com logo in svg

Panasonic DC-BS1H, Operating Instructions Manual

Share
Download
Panasonic DC-BS1H Operating Instructions Manual Download Page 244

- 244 -

- 244 -

12.  Remote Operations - Wi-Fi Connections

[Direct]

Directly connect the camera and the external device.

1

  Select the method for connecting with the external device.

[WPS Connection]

[WPS (Push-Button)]

Press the WPS button on the external device to connect.

 

●

On the camera, press [Fn1] to extend the connection wait time.

[WPS (PIN code)]

Enter the PIN code into the camera, and connect.

[Manual Connection]

Search for the camera on the external device to connect.
Enter the SSID and password displayed on the screen of the output destination into the device.

 

●

If the destination is set to smartphone, the password is not displayed. Select the SSID to 
establish a connection. (  

228

 / 

Connecting to a Smartphone (Wi-Fi connection)

)

 

●

Also refer to the operating instructions for the device to be connected.

 

●

The name of the camera (SSID) can be changed:
[ ]   [ ]   [Device Name] (  

206

 / 

[Device Name]

)

Summary of Contents for DC-BS1H

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands