manualshive.com logo in svg

Panasonic DC-BS1H, Operating Instructions Manual, Page: 129 / 304

Share
Download
Panasonic DC-BS1H Operating Instructions Manual Download Page 129

- 129 -

- 129 -

6.  Special Video Recording - Anamorphic Recording

[Anamorphic Desqueeze Display]

Display the desqueezed images suited to the magnification of the anamorphic lens. Using the [Frame Marker], it is also possible 
to impose on display the frame of the angle of view when cropping after de-squeeze editing.

1

  Set [Anamorphic Desqueeze Display].

 

●

[MENU/SET]   [ ]   [ ]   [Anamorphic Desqueeze Display]
Settings: [ ] (2.0x) / [ ] (1.8x) / [ ] (1.5x) / [ ] (1.33x) / [ ] (1.30x) / [OFF]

 

●

Make settings to suit the magnification of the anamorphic lens you are using.

2

  Set [Frame Marker].

 

●

[MENU/SET]   [ ]   [ ]   [Frame Marker] (  

109

 / 

[Frame Marker]

)

 

●

During recording, images output via HDMI are not displayed de-squeezed.

Summary of Contents for DC-BS1H

















































































































































































































































































































Reviews:

No comments