Panasonic DC-BGH1 Operating Instructions Manual Download Page 214

Page: 214 / 284

- 214 -

12. Remote Operations - Connecting to a Smartphone

Installing “LUMIX Sync”

“LUMIX Sync” is an application for smartphones provided by Panasonic.

Supported OS

Android™: Android 5 or higher

iOS: iOS 11 or higher

Connect the smartphone to a network.

(Android) Select “Google Play™ Store”.

(iOS) Select “App Store”.

Enter “Panasonic LUMIX Sync” or “LUMIX” into the search box.

Select and install the “Panasonic LUMIX Sync” .

●

Use the latest version.

●

Supported OSs are current as of October 2020 and are subject to change.

●

Read the [Help] in the “LUMIX Sync” menu for further details on how to operate.

●

The camera cannot be connected to “LUMIX Tether” and “LUMIX Sync” at the same time.

●

When the recording mode is [P] / [A] / [S] / [M], you cannot connect to “LUMIX Sync”.

Select [Creative Video Mode] in [Rec Mode] of the recording mode menu.

●

The app may not operate correctly depending on your smartphone.

For information on the “LUMIX Sync”, refer to the following support site:

https://panasonic.jp/support/global/cs/dsc/

(English only)

Summary of Contents for DC-BGH1





























































































































































































































































































Search results

Summary of Contents for DC-BGH1

Reviews:

Panasonic DC-BGH1, Operating Instructions Manual, Page: 214 / 284

Search results

Summary of Contents for DC-BGH1

Reviews: