background image

ENGLISH

5

CAUTION

 

Switch off the power supply and unplug before cleaning.

 

Do not touch the aluminium fi n, sharp parts may cause injury.

INDOOR UNIT

CLEANING  INSTRUCTIONS

CLEANING  INSTRUCTIONS

HINT

HINT

•  Do not use benzene, thinner or scouring powder.

•  Use only soap (  pH7) or neutral household detergent.

•  Do not use water hotter than 40°C.

•  To ensure optimal performance of the unit, cleaning 

maintenance has to be carried out at regular intervals. 

Dirty unit may cause a malfunction and you may see 

error code “H99”. Please consult authorized dealer.

2

5

6

7

1

4

3

9

8

1

INDOOR UNIT

•  Wipe the unit gently with a soft, dry cloth.

2

FRONT PANEL

Remove Front Panel

•  Raise and pull to remove the front panel.

•  Wash gently and dry.

Close Front Panel

•  Press down both ends of the front panel to close it securely.

3

REMOTE CONTROL RECEIVER

4

ALUMINIUM FIN

5

HORIZONTAL AIRFLOW DIRECTION LOUVER

E9NKKW, E12NKKW

• Manually adjustable.

E18NKK, E22NKK

•  Do not adjust by hand.

6

VERTICAL AIRFLOW DIRECTION LOUVER

•  Do not adjust by hand.

7

AUTO OFF/ON BUTTON

•  Use when remote control is misplaced or a malfunction occurs.

Action

Mode

Press once.

Auto

Press and hold until 1 beep is heard, then release.

Cooling

Press and hold until 1 beep is heard, then release.

Press again until 2 beeps are heard, then release.

Heating

Press the button to turn off.

8

ANTI-BACTERIAL FILTER

Anti-bacterial 

fi

 lter.

• Clean the 

fi

 lter whenever necessary.

• Wash/rinse the 

fi

 lter gently with water to avoid damage to the 

fi

 lter.

• Dry the 

fi

 lter thoroughly under the shade, away from 

fi

 re or 

direct sunlight.

• Replace the 

fi

 lter every 10 years or replace any damaged 

fi

 lter.

Part no.: CZ-SA22P

9

AIR FILTERS

• Air 

fi

 lters cleaning is required every two weeks.

• Wash/rinse the 

fi

 lters gently with water to avoid damage to the 

fi

 lter surface.

• Dry the 

fi

 lters thoroughly under the shade, away from 

fi

 re or 

direct sunlight.

•  Replace any damaged 

fi

 lter.

Summary of Contents for CS-E12NKKW











Reviews: