Operating Instructions
150
5.3
Specifying Operation Time
The Operation Time page allows you to limit the time that the camera is in use. The
camera image turns to a gray screen outside operation time.
Note
•
Your privacy may be compromised if the time period is set incorrectly. Confirm
the time period after the setup.
•
If you access the camera as an administrator, you can view the image outside
the time period.
1.
Click [Operation Time] on the Setup page.
2.
Click a
No.
to set the operation time.
Note
•
If No. 1—7 are disabled, the camera can always be operated.
3.
Check [Enable], set the time, and click [Save].
•
Clicking [Cancel] takes you back to the previous page without saving
changes.
