background image

69

59

E
N

G

L

I

S
H

60

E
N

G

L

I

S
H

68

CQ-VA7800N

CQ-VA7800N

Troubleshooting

(continued)

Trouble

Cause/Step

Display Unit

The tilt angle or the
front-rear position of
the display is not
adjustable.

There is an obstacle.

a

Install the unit where the unit moves freely.

The display does not
go back into the unit.

The display stops on the way to the home position.

a

Press [

] (OPEN/CLOSE).

Trouble

Cause/Step

Remote Control

Buttons are invalid for
operation.

Battery Poles (+) (–) are reversed.

a

Insert the battery correctly.

Wrong battery.

a

Check the battery.

Battery has run down.

a

Replace the battery.

Remote control is in the wrong direction.

a

Direct the remote control at remote control sensor on the display unit.

Trouble

Cause/Step

Connection or installation of the TV antenna has not been performed correctly.

a

Check the connection or installation.

The intensity of the radio wave is too low.

a

Change the broadcast station. 

Unclear image due to
noise.

TV

Trouble

Cause/Step

External Video Source (DVD Player, Rear View Camera, VCR, Camcorder),
Rear Monitor and Car Navigation System

The picture from a car
navigation system is
not displayed.

The connection of a car navigation system is not correct.

a

Connect it correctly.

Input setting of a car navigation system is not correct.

a

Make the input setting correct.

The picture from 
external devices are
not displayed.

External devices are not connected correctly.

a

Connect external devices correctly.

The picture from a rear
view camera is not 
displayed.

Rear view camera is not connected correctly.

a

Connect rear view camera correctly.

Input setting of a camera is not correct.

a

Make the input setting correct.

Trouble

Cause/Step

Display Settings

The brightness of the
screen is not stable.

“AUTO” dimmer is selected.

a

Select one of the dimmer levels from among 1 to 5 to make the dimmer
adjustment become free from light intensity.

The picture is dark.
The picture is whitish.
Something is wrong
with the picture. 
The picture is light in
color.

The screen is not adjusted properly.

a

Make every adjustment of the screen.

Trouble

Cause/Step

Sound Settings

No sound from left,
right, front, or rear
speaker.

Left and right balance, or front and rear balance is off on one side.

a

Adjust BAL/FAD as appropriate (

a

page 36).

Cables are not correctly connected.

a

Connect the cables correctly.

Left and right sounds
are reversed.

The right speaker lead is connected to the left speaker and the left speaker lead
to the right speaker.

a

Connect the speaker leads to the correct one.

Summary of Contents for CQ-VA7800N



































Reviews: