Panasonic CQ-R235W, Manual

Page: 36 / 48

18
CQ-R235W
E
N
G
L
I
S
H
16
Installation Procedures
Note: Disconnect the cable from the negative (–) battery terminal.
1. Secure the Mounting Collar
q
.
Insert Mounting Collar
q
into the dashboard, and bend the mounting tabs out with a screwdriver.
q
Mounting Collar
Dashboard
Screwdriver
Make sure that the
lock lever is flush
with the mounting
collar (not project-
ing outward).
Lock Lever
2. Secure the rear of the unit.
a) Check the electrical connections by referring to this operating instructions.
b) Connect Mounting Bolt
t
, using a suitable wrench.
c) Insert Power Connector
y
to the unit.
d) Insert the unit into Mounting Collar
q
and push it in until a “click” is heard.
e) Secure the rear of the unit to the car by either of the two recommended
methods.
¡
Using the Rear Support Strap
e
Affix one end of the Rear Support
Strap
e
to the rear of the unit, and
the other end to the fire wall of car,
or some other metallic area.
y
Power Connector
Unit
Unit
t
Mounting Bolt
Fire Wall of Car
w
Hex. Nut
e
Rear Support Strap
t
Mounting Bolt
q
Mounting Collar
r
Tapping Screw
3 mmø
Mounting Tab
¡ When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your
hands and fingers.
¡ We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
Installation
(continued)