9
CQ-DFX972N
6
E
N
G
L
I
S
H
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band selections.
Manual Preset
Memory
Manually save a station in
the preset memory.
Select a band and frequency (step
w
and
e
on the previous page)
q
Press and hold
[
}
]
or
[
{
]
for more than 2 seconds until the preset
number blinks.
w
Press
[
}
]
or
[
{
]
to select a preset number.
e
Press and hold
[
}
]
or
[
{
]
for more than 2 seconds to memorize.
The display blinks once, and a receiving
station is saved in the memory.
Notes:
¡
Frequency setting can be performed even after selecting a preset number.
¡
To suspend preset write, press
[DISP]
.
Entering numbers directly from the remote control
Select a band and frequency (step
w
and
e
on the previous page)
Press and hold one of the preset button from
[1]
to
[6]
on the remote control
for more than 2 seconds.
Auto Preset
Memory
Automatically save stations
with good reception in the
preset memory.
¡
The 6 stations with good reception will be automatically saved in the
memory under preset numbers
1
to
6
.
¡
Once set, the preset stations are sequentially scanned for 5 seconds each.
¡
To stop the scanning, press
[
}
]
or
[
{
]
.
(Pressing
one of the preset button from
[1]
to
[6]
on the remote control
also can stop the scanning.)
Note:
Only RDS stations will be saved at default setting (AF ON). To select non
RDS stations too, set AF OFF. (
a
Page 11)
Preset Station
Calling
Select a band (step
w
on the previous page)
Press
[
}
]
or
[
{
]
to select the preset number for tuning in the preset station.
Press one of the preset button from
[1]
to
[6]
on the remote control.
Note:
New stations are overwritten on existing saved stations after following this procedure.
Entering numbers directly from the remote control
Station Preset
Scanning
Searching
Select a band (step
w
on the previous page)
Press and hold
[BAND]
for more than
2 seconds.
