manualshive.com logo in svg

Panasonic CQ-DFX602N, Operating Instructions Manual, Page: 37 / 42

Share
Download
Panasonic CQ-DFX602N Operating Instructions Manual Download Page 37

37

CQ-DFX602N

34

E

N

G

L

I

S

H

.

Only sound, no display

Noise.

Buttons unusable
(each source operation).

Audio sound is output
but the display shows
demonstration message.

Problem

Possible cause / Possible solution

Battery cable is not correctly connected.

a

Connect the battery cable to the terminal that is always live.

The motor antenna relay control lead is not connected correctly.

a

If there is a motor antenna in the car, connect the motor antenna relay
control lead to the motor antenna lead that is installed in the car correctly.

The radio antenna is not extended enough.

a

Extend the radio antenna enough.

Station is too far, or signals are too weak.

a

Select other stations of higher signal level.

Poor reception of FM
stereo and monaural
broadcasts.

Preset station is reset.

■

Radio

Problem

Possible cause / Possible solution

■

Common (Continued)

Demonstration mode is ON.

a

Press 

[DISP] 

to cancel the demonstration mode.

Menu is displayed.

a

Press 

[MENU] / [SEL]

or 

[DISP] 

to return to the regular mode.

A mobile phone is used near the unit.

a

Keep the mobile phone away from the unit.

The display is set to the Display OFF.

a

Press 

[DISP]

to change the display. (

a

Page 7)

Summary of Contents for CQ-DFX602N











































Reviews:

No comments