background image

F

R
A
N
Ç
A

I

S

CQ-DF801/DFX701/DF601U

3

E
N

G

L

I

S
H

CQ-DF801/DFX701/DF601U

2

Find the model number and serial number on either
the back or bottom of the unit. Please record them
in the space below and retain this booklet as a per-
manent record of your purchase to help with identi-
fication in case of theft.

CQ-DF801U/

MODEL NUMBER

CQ-DFX701U/CQ-DF601U

SERIAL NUMBER

DATE PURCHASED

FROM

Il est recommandé de noter, dans l’espace prévu ci-
dessous, les numéros de modèle et de série inscrits soit
à l’arrière soit sous le fond de l’appareil, et de conserver
ce manuel comme mémorandum de l’achat afin de per-
mettre l’identification de l’appareil en cas de vol.

CQ-DF801U/

NUMÉRO DE MODÈLE

CQ-DFX701U/CQ-DF601U

NUMÉRO DE SÉRIE

DATE DE L’ACHAT

VENDEUR

Busque el número del modelo y el número de serie ya
sea en la parte trasera o en el fondo de la unidad. Sírvase
anotar dichos números en el espacio siguiente, y man-
tenga este librete como una anotación permanente de su
compra para ayudar en la identificación en el caso de
robo.

CQ-DF801U/

NÚMERO DEL MODELO

CQ-DFX701U/CQ-DF601U

NÚMERO DE SERIE

FECHA DE COMPRA

NOMBRE DE LA TIENDA

C Q - D F 8 0 1 U

Model No.

N˚ De Modèle

Serial No.

N˚ De Série

Manufactured by Dalian Matsushita 
Communication Industrial Co., Ltd.
Dalian China    Made in China

This device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
condition that this device does not cause 
harmful interference.

15A

12V

4~8  

FM75  

DISP

3

(CQ-DF801U)

Label Indication and Location

Safety Information

Consignes de sécurité

Información para su seguridad

E
S
P
A
Ñ

O

L

CAUTION:

THIS PRODUCT IS A CLASS 

I

LASER PROD-

UCT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, AND ANNOYING INTERFERENCE, USE
ONLY THE INCLUDED COMPONENTS.

Laser products:

Wave length: 780 nm
Laser power: No hazardous radiation is emitted

with safety protection.

ATTENTION :

CET APPAREIL EST UN PRODUIT LASER DE LA CLASSE

I

L’UTILISATION DE COMMANDES OU RÉGLAGES OU
L’EXÉCUTION D’OPÉRATIONS AUTRES QUE CELLES
QUI SONT INDIQUÉES DANS CE DOCUMENT PEUVENT
RÉSULTER EN UNE EXPOSITION À UN RAYONNEMENT
DANGEREUX.
N’OUVREZ PAS LES COUVERCLES ET N’ESSAYEZ PAS
D’EFFECTUER VOUS-MÊME DES RÉPARATIONS.
ADRESSEZ-VOUS À UN PERSONNEL QUALIFIÉ POUR
TOUTE RÉPARATION.

MISE EN GARDE:

POUR RÉDUIRE LES RISQUES D’INCENDIE OU D’ÉLEC-
TROCUTION, N’EXPOSEZ PAS CET APPAREIL À LA
PLUIE OU À L’HUMIDITÉ.

AFIN DE PRÉVENIR TOUT RISQUE D’INCENDIE OU
D’INTERFÉRENCES, UTILISER UNIQUEMENT LES
COMPOSANTS FOURNIS.

Produits laser:

Longueur d’onde: 780 nm
Puissance du laser: Aucune  radiation  dangereuse

n’est émise avec la protection de
sécurité.

PRECAUCIÓN:

ÉSTE ES UN PRODUCTO LÁSER DE LA CLASE 

I

LA UTILIZACIÓN DE CONTROLES, EL HACER
AJUSTES O EL SEGUIR PROCEDIMIENTOS DISTINTOS
DE LOS ESPECIFICADOS EN ESTE MANUAL PODRÍA
CAUSAR UNA EXPOSICIÓN PELIGROSA A LA RA-
DIACIÓN.
NO ABRA LAS CUBIERTAS NI HAGA REPARACIONES
USTED MISMO. SOLICITE LOS TRABAJOS DE SERVI-
CIO AL PERSONAL CALIFICADO.

ADVERTENCIA:

PARA REDUCIR EL RIESGO DE INCENDIOS O
SACUDIDAS ELÉCTRICAS, NO EXPONGA ESTE
PRODUCTO A LA LLUVIA NI A LA HUMEDAD.

PARA REDUCIR EL RIESGO DE INCENDIOS O SACUDI-
DAS ELÉCTRICAS, Y PARA EVITAR LAS 
INTERFERENCIAS MOLESTAS, UTILICE 
SOLAMENTE LOS COMPONENTES INCLUIDOS.

Productos láser:

Longitud de onda: 780 nm
Potencia láser: Con protección de seguridad no se

emite radiación peligrosa.

§

Déclaration d’interférence de fréquences radio

(Partie 15 des Règlements FCC):
Cet appareil numérique de Classe B est conforme au
règlement ICES-003 canadien.

Radio Frequency Interference Statement (Part 15 of the FCC Rules):

Applies only in U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to
Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in an automo-
bile installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio reception, which can be determined by
turning the equipment off and on, the user is encouraged to consult the dealer or an experience radio
technician for help.

FCC Warning:
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate
this device.

This device complies with Part 15 of the FCC Rules:
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired

operation.

§

For Canada:

This Class B digital apparatus complies with Canadian ICES-003.

Summary of Contents for CQ-DF701


























Reviews: