CQ-C7205U/C7105U
15
English
XM Receiver
1
Press
[SOURCE]
to select the XM
Satellite Radio mode.
2
Press
[BAND]
to select a band.
Notes:
¡
Connect the optional XM receiver (XMD-1000).
¡
To connect the XM receiver (XMD-1000), it is
required to use an optional extension cord that is
produced by XM exclusively for Panasonic prod-
ucts.
¡
“RADIO ID” is displayed with channel 0.
¡
“UPDATING” is displayed during the update of the
identification code.
¡
“LOADING” is displayed during the acquisition of
audio data or information.
3
Select a channel.
Channel selection
[
]
]
(
TUNE
): Preceding channel
[
[
]
(
TUNE
): Next channel
Preset channel selection
[
{
]
(
P-SET
: Preset): Lower preset channel
[
}
]
(
P-SET
: Preset): Higher preset channel
Notes:
¡
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
¡
A preset station is selectable by turning
[VOL]
and pressing
[PUSH SEL]
while the preset list
screen is present on the monitor.
¡
The volume is not adjustable while the preset list
screen is present on the monitor.
Up to 6 channels can be preset in XM1 to XM3
respectively.
Preset channels can be simply called up by pressing
[
}
]
(
P-SET
) or
[
{
]
(
P-SET
).
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
1
Tune into a channel.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Turn
[VOL]
to select a preset number.
4
Hold down
[PUSH SEL]
for 2 sec. or
more, and the channel is written on the
selected preset number.
Preset number/channel number blinks once.
Notes:
¡
In step 2, a channel can be registered by holding
down the numeric button
[1]
to
[6]
for 2 sec. or more.
¡
To stop presetting channels, press
[DISP:
DISPLAY
]
.
¡
The operation above allows users to replace the cur-
rent channel with the channel preset in the selected
number while selecting a preset channel.
¡
The channel may be different between when the chan-
nel is preset and when the channel is called up
because channel preset is performed using Service ID.
XM Receiver
Mode Display
Artist name/Song title
Band
Preset Number
Channel number/name
indicates the satellite
receiver is ready.
Operation Flow
Channel Preset
(P-SET: PRESET)
C7205U̲SU̲01̲eng.qxd 06.11.6 10:21 AM ページ15
Summary of Contents for CQ-C7105U
Page 40: ...CQ C7205U C7105U 114 Memorandum ...
