manualshive.com logo in svg

Panasonic Cordless Phon, Operating Instructions Manual, Page: 4 / 108

Share
Download
Panasonic Cordless Phon Operating Instructions Manual Download Page 4

4

For Best Performance

Handset Battery Charge

A rechargeable Nickel-Metal Hydride 
(Ni-MH) battery powers the cordless
handset. Charge the battery for about 

8

hours

before initial use (p. 16). Make sure

the handset faces forward as shown.

•

If you charge the discharged battery, it will be
charged quickly. In that case the handset
may feel warm. This is normal.

Base Unit Location/Noise

Calls are transmitted between the base unit and the cordless handset
using wireless radio waves. 

For maximum distance and noise-free

operation,

the recommended base unit location is:

Away from electrical appliances 
such as a TV, personal computer or 
another cordless phone.

In a HIGH and CENTRAL location 
with no obstructions such as walls.

Raise 
the antenna.

The battery 
is beneath 
this cover. 

Note:

— If you use the cordless handset near a microwave oven which is being used,

noise may be heard from the receiver. Move away from the microwave oven and
closer to the base unit.

— If you use the cordless handset near another phone’s base unit, noise may be

heard. Move away from the other cordless phone’s base unit and closer to your
base unit.

Summary of Contents for Cordless Phon













































































































Reviews:

No comments