131
Wireless LAN
2
Click
T
and click [Wireless On] or [Wireless Off].
Enable/Disable Wireless LAN Standard IEEE802.11a
In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is
restricted by law. Comply with the laws in the country concerned. (
⇒
Operating Instructions
"Read Me First")
1
Click the
icon (when the wireless LAN is on) or the
icon
(when the wireless LAN is off) on the notification area.
2
To disable IEEE802.11a:
z
Click [802.11a Disabled].
To enable IEEE802.11a:
z
Click [802.11a Enabled].
z
To use IEEE802.11a, turn the wireless LAN on.
z
If IEEE802.11a is enabled or disabled while the computer is connected to an
IEEE802.11b/g access point, the connection to the access point will be
temporarily interrupted.
Note that when IEEE802.11a is enabled/disabled by using the Wireless LAN Switch
Utility after settings have been changed using “Device Manager”
communications using the following standards will be conducted.
Settings in Device Manager
Settings in Wireless LAN Switch Utility
When IEEE802.11a is
enabled
When IEEE802.11a is
disabled
[802.11a, 802.11b and 802.11g] or
[802.11b and 802.11g]
a+b+g is enabled
b+g is enabled
[802.11g only] or [802.11a and 802.11g]
a+g is enabled
g is enabled
[802.11a only] or [802.11b only]
a is enabled
b is enabled