41
WinDVD
WinDVD is a software application for DVD playback. For further information, refer to the software’s online manual.
DVD-Audio cannot be played back using WinDVD.
1
Double-click
on the desktop.
Alternatively click [start] - [All Programs] - [InterVideo WinDVD] - [InterVideo WinDVD].
To access the online manual
After starting WinDVD, perform either of the following procedures.
Click “?” on the WinDVD control panel.
Right-click on the WinDVD screen and click [Help].
CAUTION
Do not start WinDVD while the hard disk drive indicator
is blinking immediately after the computer is turned on.
While WinDVD is running, do not:
• Enter standby or hibernation.
• Switch the output destination by pressing
Fn
+
F3
.
• Turn off the CD/DVD drive power.
If performing the operations described above, shut down WinDVD, then restart.
During motion video playback, do not:
• Eject the disk.
• Use other applications or the Command Prompt.
• Change the settings of the screen properties.
• Turn off the CD/DVD drive power.
If performing the operations described above, shut down WinDVD, then restart.
Do not install another player software together with WinDVD.
Doing so may interfere with smooth playback. Some DVD-Video disks contain the player software and start installing. In
this case, cancel the installation as soon as possible. If you accidentally installed another player software and find a prob-
lem in playback, try either of the following procedures.
Running WinDVD
SUPPORT INFORMATION
If WinDVD does not operate properly, we recommend carefully reading the online help file first for problems with the oper-
ating environment or operations.
If you still cannot troubleshoot the problem, enter the required information in the inquiry form on the InterVideo, Inc. home-
page (http://www.intervideo.com/), and submit the form.
