manualshive.com logo in svg

Panasonic CF-W5MWEZZBM - Toughbook W5 - Core Duo 1.06..., Reference Manual

Share
Download
Panasonic CF-W5MWEZZBM - Toughbook W5 - Core Duo 1.06... Reference Manual Download Page 36

36

CD/DVD Drive

This utility starts up when computer is started, and 

 or 

 appears on the notification area.

To turn the power on again after it has turned off: See “Turning on or off immediately” (

page 35

)

To restart this utility after selecting [Exit], click [start] - [All Programs] - [Panasonic] - [Opti-
cal Disc Drive Power-Saving Utility], or restart the computer.

When the cursor is placed over 

 or 

, pop-up text will indicate the drive status and 

the setting time.

Change the time until the power turns off

1

Select 

 

or

 

 

on the notification area.

2

Select the desired time in [Auto Off Setting].

NOTE

In the following cases, the drive power will not turn off even after the time set in [Auto Off Setting].
• When the disk cover is open
• When a disk is set in the drive
• When an external CD/DVD drive is connected (Including using a virtual CD drive)
• When WinDVD is running
• When the drive is being used by an application such as B’s Recorder

You can read from/write to the following disks.

Disk Information

CD-R

*1

CD-RW

Recordable

Summary of Contents for CF-W5MWEZZBM - Toughbook W5 - Core Duo 1.06...





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands