Panasonic CF-W2 Series Reference Manual Download

Page: 154 / 213

154

Setup Utility

NOTE

When the Setup Utility is started up with the User Password:
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will not

be displayed

• [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility Prompt], [Boot

First Menu] and [User Password Protection] will be displayed, but cannot be set

• The User Password can be changed only when [User Password Protection] has

been set to [No Protection]. The User Password cannot be deleted

• [SD Startup], [SD Setting Method] and [Clear registered SD card] will be displayed

only when an SD memory Card has been registered. (

page 109

)

Security Menu

(An underline indicates the factory default settings)

Password on boot

• Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password or

the User Password on booting

Disable
Enable

SD Startup

• Select whether to use an SD memory card instead of entering the password on booting

([Enable]) or not ([Disable])

• When registered SD memory card, this is set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable].

Disable
Enable

SD Setting Method

• Select whether to set an SD memory card to [Leave Set] or [Set and Eject] when an SD

memory card is used instead of entering the password

• This can be set only if [SD Startup] has been set to [Enable]
• Cannot be set when [Password on boot] is set to [Disable].

Leave Set
Set and Eject

Clear registered SD card

• Clear the registration from all registered SD memory cards not to be used instead of entering

the password on booting

To the sub-menu

Summary of Contents for CF-W2 Series






















































































































































































































Search results

Summary of Contents for CF-W2 Series

Reviews:

Related manuals for CF-W2 Series

Brands by name

Popular brands

Panasonic CF-W2 Series, Reference Manual

Search results

Summary of Contents for CF-W2 Series

Reviews:

Related manuals for CF-W2 Series

Brands by name

Popular brands