Panasonic CF-H1 Series Reference Manual Download Page 85

Page: 85 / 113

Setup Utility

Underlined items are the factory presets.

Main Menu

System Date

• Week/Month/Day/Year.

• You can use

Tab

to move the cursor.

[xx x/xx/xxxx]

System Time

• 24-hr. style.

• You can use

Tab

to move the cursor.

[xx:xx:xx]

Main Configuration

SAS Button

F10

F11

F12

Handle Button

Disabled

Enabled

Display

• The display during the Windows start-up process. When an external display is not con-

nected, the information appears on the internal LCD even though the [External Monitor] is

selected.

External Monitor

Internal LCD

Battery Charging Indicator

• When set to [Flashing], the battery charging indicator flashes at relatively long intervals

while the battery is being charged.

On Continuous

Flashing

Environment

Normal Temperature

High Temperature

Auto

Battery 1 Current Status

• Only when [Environment] is set to [Auto].

Depending on the battery

status, either “Normal

Temperature” or “High

Temperature” is displayed.

Summary of Contents for CF-H1 Series


















































































































Search results

Summary of Contents for CF-H1 Series

Reviews:

Related manuals for CF-H1 Series

Brands by name

Popular brands

Panasonic CF-H1 Series, Reference Manual

Search results

Summary of Contents for CF-H1 Series

Reviews:

Related manuals for CF-H1 Series

Brands by name

Popular brands