manualshive.com logo in svg

Panasonic CF-C1 Series, Reference Manual

The Panasonic CF-C1 Series is a rugged and versatile laptop designed for professionals on the go. Featuring a compact design and powerful performance, this mobile computer is perfect for those working in demanding environments. Ensure proper usage by downloading the free user manual addendum from manualshive.com and make the most out of your device.

Share
Download
background image

106

External Display

CAUTION

Before disconnecting the external display, switch to the internal LCD by pressing 

 

 + 

P

 or 

Fn

 + 

F3

 /

 

Fn

 + 

F3

. Otherwise the displayed image quality may become different after disconnection (e.g., wrong 

resolution). In this case, press 

 

 + 

P

 or 

Fn

 + 

F3

 / 

 

Fn

 + 

F3

 to reset the image quality.

The screen may become distorted due to the following operations. In this case, restart the computer.
• Disconnecting an external display for which you have set high resolution or high refresh rate.
• Connecting/disconnecting an external display during computer operations.

NOTE

Always change the settings in the manner described above.
It may not be possible to use the extended desktop with some software applications.
When you click the maximize button, the window is displayed on one of the displays. You cannot move the maximized 
window to the other display.
Do not use the display rotation in the extended desktop.
To switch to the Extended Desktop, be sure to use the [Intel

®

 Graphics and Media Control Panel] screen or the [New 

Display Detected] screen.
The pop-up icon displayed by 

Fn

 key combination appears only on the primary display.

Set the internal LCD to the primary display when using the screen. The cursor will move on the primary display when 
you touch the internal LCD.

When the application running is not shown on the display:

When the application is in the external display or after the application is closed in the external display, there are times 
the application will not be shown in the display when executed the next time if the position of the extended display is 
changed or the Extended Desktop is closed.

When there is no display after the position of the extended display is changed:

 

The application running is displayed at the position of the extended display before the change. Return the position of 
the extended display to the condition before the change. Move the application to the internal LCD, and then correct the 
position of the extended display.

 

When there is no display when the Extended Desktop is disabled:

 

The application running is being displayed in the external display. Set the Extended Desktop again, move the 
application from the external display to the internal LCD and then disable the Extended Desktop.
When the display domain for the Extended Desktop is changed, the wallpaper and icons may become displaced.

When an animated pointer is used for the mouse pointer:

An error may occur when resuming from the 

 

sleep / 

 standby or hibernation. In such cases, 

change the mouse pointer to the standard pointer with the following procedure:

Using Extended Mode

Windows 7

Windows XP

Windows 7

Windows XP

Windows 7

Windows XP

Summary of Contents for CF-C1 Series

























































































































































































































Reviews:

No comments

Related manuals for CF-C1 Series

IBM Aptiva 2190 Hardware Maintenance Service preview
Aptiva 2190
Brand: IBM Pages: 165
Aaeon TKS-G50-QM77 Manual preview
TKS-G50-QM77
Brand: Aaeon Pages: 117
Contec 955 Series User Manual preview
955 Series
Brand: Contec Pages: 116
Toshiba Satellite M100 Series Specifications preview
Satellite M100 Series
Brand: Toshiba Pages: 2
Toshiba Satellite M100 Series User Manual preview
Satellite M100 Series
Brand: Toshiba Pages: 283
Arrow Cyclone 10 LP RefKit User Manual preview
Cyclone 10 LP RefKit
Brand: Arrow Pages: 75
Vivo DESK-V000V Series Instruction Manual preview
DESK-V000V Series
Brand: Vivo Pages: 12
Bitfily B1+ User Manual preview
B1+
Brand: Bitfily Pages: 11
DM&P Group eBOX 3300 User Manual preview
eBOX 3300
Brand: DM&P Group Pages: 27
Digital Electronics Corporation Pro-Face PL-6900 Series User Manual preview
Pro-Face PL-6900 Series
Brand: Digital Electronics Corporation Pages: 105
maximatecc CCpilot XM Software Manual preview
CCpilot XM
Brand: maximatecc Pages: 38
maximatecc CCpilot VA Technical Manual preview
CCpilot VA
Brand: maximatecc Pages: 41
Alpha Microsystems AM-6060 Owner'S Manual preview
AM-6060
Brand: Alpha Microsystems Pages: 93
VarTech Systems VTPC150V User Manual preview
VTPC150V
Brand: VarTech Systems Pages: 10
Xerox 6085 PCS Service Manual preview
6085 PCS
Brand: Xerox Pages: 194
Radio Shack TRS-80 Model 4 Owner'S Manual preview
TRS-80 Model 4
Brand: Radio Shack Pages: 418
Tennsco TWCTL-48 Assembly Instructions/Parts Manual preview
TWCTL-48
Brand: Tennsco Pages: 4
IBM 6150 Hardware Maintenance Manual preview
6150
Brand: IBM Pages: 649

Brands by name

Popular brands

Load more brands