107
Dealing with Problems (Advanced)
Fast User Switching Function
Some applications may not work
properly
z
When switching to a different user with the Fast User Switching function, the
following problems may occur.
• Some applications may not work properly.
• Key combination with
Fn
may not work.
• It may not be possible to set the settings of the display.
• The wireless LAN cannot be used.
• A serial mouse may not work.
• The B's CLiP icon will no longer be shown on the taskbar and B’s CLiP cannot
be used.
In this case, log off all users without using Fast User Switching function, and try
the operation once more. If the problem persists, restart the computer.
Others
No response
z
Press
Ctrl
+
Shift
+
Esc
to open Task Manager and close the software
application which is not responding.
z
After shutting down by pressing the power switch for more than four seconds,
press the power switch to power on and open the application again. If the
program no longer works normally, delete the program using the following
menu. Then reinstall the program.
[start] - [Control Panel] - [Add or Remove Programs]
When trying to play back video files
using Windows
®
Media Player, the
message [Codec required] appears,
and the file cannot be played back
z
Some video files use a Codec that is not installed as a standard. In these
cases, if you play back the video file after connecting to the Internet, the Codec
may be downloaded automatically, allowing you to play back the file.
The shortcut icon for the Windows
®
Media Player is not displayed on the
desktop
z
Start up Windows
®
Media Player from [start] - [All Programs]. Also, you can
copy the icon from [All Programs] list to the desktop and use this icon to start
Windows
®
Media Player.
Two shortcut icons for the Windows
®
Media Player are displayed on the
desktop
z
Did the user who first accepted the Windows
®
Media Player license agreement
have the administrator authority? Two icons will be displayed until someone
with the administrator authority accepts the license agreement, but either icon
can be used to start the program.
