113
Setup Utility
Boot Prompt Configuration
Underlined items are the factory presets.
Security Menu
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message “Press F2 for Setup / F12 for LAN”
is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message
is not displayed.
Disabled
Enabled
Boot Popup Menu
Enabled
Disabled
Password On Boot
Disabled
Enabled
Password On Resume
• Can be changed only when [Password On Boot] is set to [Enabled].
Disabled
Enabled
Boot Device on Hibernation Resume
Try prior devices
Hard Disk only
Set Supervisor Password
Enter the sub-menu.
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
Disabled
Enabled
User Password Protection
No Protection
Protected
Set User Password
• Can be changed only when [Set Supervisor Password] is set.
Enter the sub-menu.
X
Embedded Security(TPM)
• Only for model that supports TPM
• For information on TPM, refer to the
Installation Manual
of “Trusted Platform Module (TPM)”.
Click
(Start), input “c:\util\drivers\tpm\readme.pdf” in [Search programs and files], and press
Enter
.
Click [start] - [Run], input “c:\util\drivers\tpm\readme.pdf”, and click [OK].
Enter the sub-menu.
X
Fingerprint Security
• Only for model with Fingerprint Reader
Enter the sub-menu.
X
AMT Configuration
Enter the sub-menu.