6
BT-WMA26G
Wall Mount Adaptor (Adjustable angle type)
Wall mount adapter for LCD
monitor . . . . . . . . . . . . . . . .
×
1
Tool for the installation: Use a torque driver or torque wrench with torque of 3 N·m or more.
Unit fixing screws . . . . . .
×
2
( + M5-35)
Allen head countersunk
screws . . . . . . . . . . . . . . .
×
4
(M4-18)
Dished toothed washers . . .
×
4
Insulation spacers . . . . . . . .
×
4
Precautions for wall mount adaptor installation
■
There are lock mechanisms on either side of the unit, so secure space between the LCD
monitor and any wall surfaces to the left or right of at least 30 cm (11
13
/
16
inches).
■
To ensure correct LCD monitor performance and prevent trouble, do not install at any of the
following locations.
•
Near sprinklers or fire/smoke detectors
•
Near high-voltage wires or dynamic power supplies
■
Ensure good air flow so that the equipment ambient temperature does not exceed 35 °C (95 °F).
Failure to do this may cause heat to build up inside the LCD monitor, resulting in
malfunction.
Panasonic does not accept any responsibility for accident or damage during
installation if procedure in this manual is not followed.
1) Exercise care when selecting the location for the monitor because it may discolor or deform due to light or
heat if it is placed where it is exposed to direct sunlight, or near a heater.
2) Upkeep
Wipe with a dry cloth. If the unit is extremely soiled, first wipe off soiling with a neutral detergent diluted in
water, and then wipe with a dry cloth. Do not use cleaners such as benzene, thinner or furniture wax because
they may cause paint peeling. (If using a chemical wiping cloth, follow any precautions included.)
3) Do not affix adhesive tape or stickers. Doing so may dirty the surface of the wall mount adaptor.
Requests regarding handling
Components
• The illustrations are image illustrations and they may be different from the actual product and
shape.
