background image

Operating Instructions

HD-PLC Ethernet Adaptor

Power Line Communication

Model No.

  

BL-PA100KTA

Set of 2 Adaptors (Master and Terminal)

Introduction

Introduction ................................................................................................ 2

IMPORTANT SAFETY INSTRUCTIONS.................................................... 4

Electrical environment information ............................................................. 5

Security information ................................................................................... 6

How does it work?...................................................................................... 7

Main unit..................................................................................................... 8

Installation

Placing the adaptors .................................................................................. 9

Connecting adaptors to network devices ................................................. 10

Useful Information

Testing a terminal’s network speed.......................................................... 11

Understanding the indicators ................................................................... 12

Resetting an adaptor................................................................................ 13

Registration .............................................................................................. 14

Troubleshooting........................................................................................ 15

Specifications ........................................................................................... 17

FCC and other information....................................................................... 19

Copyright information ............................................................................... 20

Limited warranty ....................................................................................... 29

Customer services ................................................................................... 31

Table of Contents

Please read this document before use and save this document for future reference.

IMPORTANT NOTES:

For best results, connect this product directly to a wall outlet.

This product may not function normally in certain electrical environments.
See page 5 for more information.

BL-PA100KTA_OI.book  Page 1  Thursday, March 16, 2006  4:17 PM

Summary of Contents for BLPA100KTA - HD-PLC ETHERNET ADAPT.2PK

































Reviews: