Panasonic BL-WV10 Operating Instructions Manual Download Page 77

Page: 77 / 164

Viewing Movies and Pictures

5.5

Useful Tips for Viewing Pictures

View a Slideshow

Select

in the Picture screen, and each individual picture will be displayed

sequentially.

Pictures are displayed in the order they were captured.

When the slideshow ends, the [Pictures] screen returns.
Press

STOP

during the slideshow to end it and return to the [Pictures] screen.

Viewing the Next (or Previous) Image

When a picture is displayed, press the left or right navigator keys to view the next
or previous image.

5.6

Erasing Recorded Pictures

Erasing Pictures

Select the picture to be erased in the [Pictures] screen and press

•

The Confirm Deletion Screen appears.

Select [Yes] and press

ENTER

•

The selected image is erased.

Press

DISPLAY

to view

different information
about the picture.

BL-WV10_OI.book Page 77 Thursday, January 26, 2006 8:03 PM

Summary of Contents for BL-WV10





































































































































































Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands

Panasonic BL-WV10, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10

Reviews:

Related manuals for BL-WV10

Brands by name

Popular brands