10
Resetting the BL-WV10
125
10 Resetting the BL-WV10
Press the
FACTORY DEFAULT RESET
button to return to default settings. You will
no longer be able to connect to the camera. After returning to default settings, you
will need to re-do the settings completely.
1.
While the BL-WV10 is turned on, set the mode switch on the back to
SETUP
.
2.
Press and hold the
FACTORY DEFAULT RESET
button for 3 seconds and
then release it.
•
The reset will be complete after you hear 2 beeping sounds.
•
After re-launching, the [Basic Setup] screen will appear.
3.
Re-perform Quick Setup.
Press and hold the
FACTORY DEFAULT
RESET
button for
about 3 seconds using
a pointed object.
Rear panel of BL-WV10
BL-WV10_OI.book Page 125 Thursday, January 26, 2006 8:03 PM
Summary of Contents for BL-WV10
