Panasonic BL-WV10, Operating Instructions Manual

Page: 118 / 164

9 Other Features
118
Note
• Other keys (including those for Camera List and Menu screen display) will not
function while the extended display is displayed. To use these keys, press
DISPLAY or RETURN to change screens first.
• In preset registration, the brightness set at registration will also be registered
(see page 41).
Setting Description
Quality Controls the resolution of the monitored image.
Setting the resolution to low will shrink the displayed image.
High: 640x480 pixels
Low: 320x240 pixels
Scan
Control Controls the panning and tilting scans of the camera.
Pan: pans the camera from its left to right extremes and back to
the original position
Tilt: tilts the camera from its top to bottom extremes and back to
the original position
Note that If the camera does not feature a pan/tilt lens, such as
the BL-C20, panning and tilting is not available.
Brightness Adjusts the brightness of the monitored image.
-: Decreases the brightness
STD: Sets the camera to the standard brightness level
+: Increases the brightness
Time Allows you to display the current time while monitoring a camera
image.
Cycle Allows you to adjust the amount of time that each camera is
displayed during sequential display mode.
BL-WV10_OI.book Page 118 Thursday, January 26, 2006 8:03 PM