Panasonic BL-C210 Series, Operating Instructions Manual

Page: 91 / 232

3.1 Accessing the Camera from Your Mobile Phone
1.
Enter
http://
followed by the IP address of the camera and
/mobile
, then access the camera.
Example:
http://***.***.***.***/mobile
•
If the camera’s port number is a port number other than 80, enter “
:
” and the port number after the IP
address.
Example:
http://***.***.***.***:50001/mobile
•
If you have registered with a DNS service, such as Viewnetcam.com (see Page 105), enter the URL
instead of the IP address.
Example:
http://***.viewnetcam.com
•
If the camera is configured to use HTTPS (see Page 119), enter
https://
followed by the IP address
or host name and the port number of the camera. Note, however, that certain mobile phones do not
support HTTPS connections.
Example:
https://***.***.***.***:80/mobile
Example:
https://***.viewnetcam.com:80/mobile
2.
If an authentication dialog is displayed, enter the user name and password.
•
A still image from the camera is displayed.
•
If the camera image is not displayed properly, try accessing the camera by entering one of the following
instead of
/mobile
.
–
/mobileh
(for HTML)
–
/mobilex
(for XHTML)
Note
•
If the camera is configured to allow access from guest users (i.e, anonymous users; see Page 155),
users can access the camera’s mobile phone pages using a mobile phone or PC without entering a
user name or password.
Operating Instructions 91
3.1 Accessing the Camera from Your Mobile Phone