Panasonic BL-C210 Series, Operating Instructions Manual

Page: 26 / 232

1.2.2 Aiming the Camera Lens
The camera can be panned from -41 ° to +41 ° from the center position, and tilted from -32 ° to +10 ° from the
center position. If the [Pan/Tilt Range] button was used to limit the maximum pan and tilt range of the camera
(see Page 28), the lens can only be moved to the maximum pan or tilt range allowed.
A
B
A.
Pan: -41 ° to +41 °
B.
Tilt: -32 ° to +10 °
There are several ways you can move the camera lens to view the desired image, as described in this section.
Click to center
Allows you to quickly and easily center the camera image on the desired point. Simply move the mouse cursor
to the desired point in the camera image, and click. Note that the camera may not be able to center on the
clicked point if it is outside of the pan and tilt range of the lens.
This feature can be disabled for general users (see Page 152) and for guest users (see Page 155). Note,
however, that if the click to center feature is disabled, users can still use this feature when using the ActiveX
zoom feature. Users can click to center the image within the zoomed area, but the lens will not pan or tilt.
Pan and tilt scan buttons
Allow you to pan or tilt the lens to its maximum pan or tilt range. The lens returns to the original position when
finished. You can click an area of the camera image to stop the scan operation and center the camera image
on the desired point.
This feature can be disabled for general users (see Page 152) and for guest users (see Page 155).
Navigation buttons
Allow you to pan the lens left and right, and tilt the lens up and down. Click the center navigation button to
move the lens to the home position.
26 Operating Instructions
1.2.2 Aiming the Camera Lens