Panasonic BL-C210 Series, Operating Instructions Manual

Page: 142 / 232

5.6 Changing Basic Camera Settings
The [Camera] page of the [Setup] tab allows you to adjust basic camera features.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Basic], click [Camera].
3.
Set the following parameters as desired.
a.
Under [AC Power Source Frequency], select the desired setting.
–
[50 Hz]: Select this item if your AC power source operates at 50 Hz.
–
[60 Hz]: Select this item if your AC power source operates at 60 Hz.
Note
•
Screen content varies by model number.
b.
Under [Return to Specified Position], select whether you want the camera to move the lens to a specific
preset position after a specified period of inactivity.
i.
Select the length of time (inactivity) that passes before the camera moves the lens. If this setting
is too short, you may have difficulty registering presets because the lens will return to the specified
position before you have saved your new preset.
ii.
Select the desired preset position (see Page 29).
c.
Under [Shutter Speed/Color Night View], select whether the camera’s shutter speed is fixed, or whether
the color night view mode feature automatically adjusts the shutter speed when the camera image is
dark.
i.
To set the shutter speed, select [Shutter Speed], then select the desired speed from the pull-down
menu.
•
The available shutter speeds depend on the [AC Power Source Frequency] setting, as follows:
50 Hz: 1/25 s, 1/50 s, 1/100 s
60 Hz: 1/30 s, 1/60 s, 1/120 s
142 Operating Instructions
5.6 Changing Basic Camera Settings