![background image](http://html.mh-extra.com/html/panasonic/bl-c1a-network-camera/bl-c1a-network-camera_operating-instructions-manual_277419082.webp)
Operating Instructions
82
10.
Click [Go to Trigger page].
•
The Trigger page is displayed.
Note
•
If you set a short interval when transferring to a cell phone, many E-mails
will be sent, which may lead to a large phone bill. Therefore, we
recommend you to set a long interval. 1 image per minute frequency is
recommended.
•
Motion Detection transfer stops operating until after the camera finishes
all transfers. For example, if the camera transfers 3 images per minute and
6 images in total by setting 1 minute for motion deactivation time, the
sensor will follow the pattern below.
•
If you are buffering images to the internal memory, the following
operations also delete all buffered images.
–
Turning off the camera.
–
Saving the Date and Time page.
–
Restarting, updating firmware or resetting the camera to factory
default.
Detectable
Undetectable
Detectable
Motion
deactivation time
Undetectable
1st
2nd 3rd
4th
5th
6th
120 seconds
1 minute
A Motion Detection signal is detected.
Summary of Contents for BL-C1A - Network Camera
Page 139: ...Operating Instructions 139 Index ...