Important Information
Network Camera
Model No.
BL-C111
(Wired Type)
BL-C131
(Wireless/Wired Type)
© Panasonic System Networks Co., Ltd. 2007
PQQX15794XA
KK0107CM2120 (CE)
How to Use the Documentation
This manual is written for both the BL-C111 (Wired Type) and the BL-C131
(Wireless/Wired Type). Available features and operations vary slightly
depending on the model. You can confirm the model no. of your camera by
checking the model no. printed on the front of the camera.
All documentation can be found on the included CD-ROM.
• Important Information
(PDF format; printed version also included)
This document. Provides general information and safety instructions for
using the camera.
• Installation Guide
(PDF format; printed version also included)
Describes how to physically connect the camera to the power supply
and network, as well how to mount or place the camera for regular use.
• Setup Guide
(PDF format; printed version also included)
Describes how to set up the camera so that it can be accessed using a
PC.
• Operating Instructions
(HTML format)
Explains how to operate, program, and maintain the camera.
• Troubleshooting Guide
(HTML format)
Provides solutions for problems you may have when using the camera.
Abbreviations
• The Network Camera is referred to as “the camera” in this document.
• The Setup CD-ROM is referred to as “the CD-ROM” in this document.
IMPORTANT SAFETY INSTRUCTIONS
When using this unit, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, or personal injury.
1.
Read and understand all instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
To clean the camera lens, first remove any dust or dirt from the lens,
then wipe the lens with a cotton bud.
6.
Do not block any ventilation openings. Install in accordance with
instructions.
7.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including amplifiers) that produce heat.
8.
Protect the AC adaptor cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the unit.
9.
The AC adaptor is used as the main disconnect device. Ensure that
the AC outlet is installed near the product and is easily accessible.
10. Only use attachments/accessories (such as stands) specified by the
manufacturer.
11. Do not touch the unit, AC adaptor, or AC adaptor cord during lightning
storms.
12. Unplug the unit when unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is required
when the unit has been damaged in any way, such as when the AC
adaptor is damaged, the unit does not operate normally, or after the
unit has been dropped.
14. The camera is intended for indoor use only. Prolonged exposure to
direct sunlight or halogen light may damage the image sensor.
15.
For BL-C131:
Please check local regulations as outdoor use of the
wireless feature is restricted in some countries/areas.
16. Unplug this unit from power outlets if it emits smoke, an abnormal
smell or makes unusual noise. These conditions can cause fire or
electric shock. Confirm that smoke has stopped and contact an
authorized service center.
SAVE THESE INSTRUCTIONS
Other Information
Environment:
Do not install the camera where the temperature is less than +5
°
C or
greater than +40
°
C. Allow 10 cm clearance around the unit for proper
ventilation. Avoid excessive smoke, dust, mechanical vibration, shock, or
direct sunlight.
Routine care:
Wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive
powder.
When you leave the unit unused for a long period of time, disconnect the
AC adaptor from the outlet.
If you have any problems:
Consult an authorized service center.
CAUTION:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this device.
For BL-C131:
– This equipment must be installed and operated in accordance with
provided instructions and a minimum 20 cm spacing must be provided
between antenna and all person’s body (excluding extremities of hands,
wrist and feet) during wireless modes of operation.
– This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.
MEDICAL:
For BL-C131:
Consult the manufacturer of any personal medical devices,
such as pacemakers, to determine if they are adequately shielded from
external RF (radio frequency) energy. (The unit operates in the frequency
range of 2.412 GHz to 2.472 GHz, and the power output level is 0.1 watts.)
Do not use the unit in health care facilities if any regulations posted in the
area instruct you not to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF (radio frequency)
energy.
Security Cautions
When using this product, take appropriate measures to avoid the following
security breaches.
• Disclosure of private information via this product
• Unauthorized use of this product by a third party
• Interference or suspension of the use of this product by a third party
You are responsible for the security of this product and its use. Take the
following measures to avoid security breaches.
• To prevent unauthorized access, disclosure of private information, or
interference or suspension of access to the camera, make sure the
camera’s firmware is up to date.
• Do not reveal the user names and passwords required to access the
camera to an unknown party.
• If you choose to configure this product to allow access to parties without
the need to enter a user name and password (i.e., guest users), be
aware that unknown parties may access this product.
• Do not upload images produced by this product or otherwise release
information where it may be accessed by unknown parties.
• Mount the camera where the camera will not be stolen.
• When sending this product for service or transferring this product to
another party, make backup copies of its setup files, and reset this
product to its factory default settings.
• When disposing of this product, reset the product to its factory default
settings, or erase the product’s memory by means of electrical deletion
or physical dismantlement.
• After the camera is accessed by the administrator, make sure to close
the browser for added security.
• Change the administrator password periodically for added security.
User Name and Password Protection
The use of unique user names and secret passwords is an important
tool that will help limit unauthorized individuals from accessing the
camera. If you choose to disable this tool by allowing guest (i.e.
anonymous) access, the camera may be accessed by unauthorized
individuals.
No responsibility will be taken by our company with respect to
consequences resulting from the use, damage or both of the
camera.
Please read this document before using the product, and save this document for future
reference.
Indoor Use Only
