Operating Instructions
[For assistance, please call: 1-800-272-7033] 125
3.1.7
Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is
clicked.
1.
Click [Reset to Factory Default] on the Maintenance page.
2.
Click [Execute].
•
The indicator blinks orange, and then turns off for 10 seconds.
•
All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.
•
If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera refer to the
Installation/Troubleshooting if necessary.
Note
•
The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 67). Set it again.
•
See page 131—page 139 for default settings.
•
Pressing the FACTORY DEFAULT RESET button resets the camera to the
factory default (see page 130).
•
All buffered images on the internal memory are deleted when resetting the
camera to factory default. The buffered images on the SD memory card
are not deleted.
•
The reset operation takes about 1 minute.
•
Do not turn off the camera during the reset operation.
Summary of Contents for BB-HCM381A - Network Camera
Page 156: ...Operating Instructions 156 ...
Page 157: ...Operating Instructions 157 Index ...
