Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
2.18 Format the SD memory card
Before you record the camera image, you need to format the SD memory card.
Notes
•
You can confirm the SD memory capacity on the Status page (see page
118).
1.
Insert the SD memory card (see page 40 of the Installation/Troubleshooting).
2.
Click [Buffer/Transfer] on the Setup page.
3.
Click [Format].
4.
Click [OK] on the confirmation window.
•
Format is complete.
5.
Click [Go to Image Buffer/Transfer page].
•
The Image Buffer/Transfer page is displayed.
