Panasonic AWHE2, Operating Instructions Manual

Page: 18 / 57

- 18 -
∫
Set the white balance
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥ Do not shoot shiny or very bright objects.
3 Turn the F2 dial to select [AWB], and press the F2 dial.
≥
When [OSD Status] is set to [On], [AWB OK] is displayed on the screen and adjustment is
completed.
≥ When the white balance cannot be set, the error message [AWB NG] is displayed on the
screen. When this occurs, use another mode.
∫
Set the white balance with the USER button
1 Set the mode to either [AWB A] or [AWB B].
2 Fill the screen with a white subject.
≥ Do not shoot shiny or very bright objects.
3 Press the USER button registered with [AWB].
≥
When [OSD Status] is set to [On], [AWB OK] is displayed on the screen and adjustment is
completed.
≥ When the white balance cannot be set, the error message [AWB NG] is displayed on the
screen. When this occurs, use another mode.
≥ Refer to the following for registering to the USER button.
Register to the USER button
1) Press the MENU button to light the button.
2) Press the PRESET MEMORY/MENU 9 button (SETUP) to light the button.
≥ The SETUP menu is displayed on the LCD panel.
3) Press the F1 dial.
4) Turn the F1 dial to display [USER1] or [USER2].
5) Rotate the F2 dial to select [AWB] and press the
F2 dial.