Panasonic AWHE2, Operating Instructions Manual

Page: 49 / 57

- 49 -
Video
Problem Check points
No pictures are
displayed or the pictures
are disturbed. ≥ Check if the unit is correctly connected with other
devices.
≥ If your system is configured in such a way that a
displayed image is automatically switched in conjunction
with your camera selection, select the correct camera.
≥
Check if [Format], [Down CONV. Mode], and [System
Frequency] are set correctly. (
l 34, 35)
The picture is flipped
vertically. ≥ Turn the middle ring portion by 180° so that the internal
stereo microphones are facing up.
Multiple color bands
(color bars) are
displayed. ≥ Switch to the camera picture. ( l 5, 43)
The menu screen is
displayed.
≥
To close the camera menu, press the MENU button of the
wireless remote controller.
≥ Press and hold the CAMERA OSD button of the controller
for 2 seconds to exit the camera menu.
Something is wrong with
the coloring of the
pictures. ≥ Set the white balance to ATW (auto). If colors do not
appear correct even in ATW mode, perform the White
Balance Setting. (
l 15)
When fine lines or
cyclical patterns are
shot, flickering is seen
or coloring is added to
them. ≥ This phenomenon occurs because the pixels are
arranged systematically on each image sensor. It is
noticeable when the spatial frequency of a subject and
the pixel pitch are brought into proximity so change the
camera angle or take other such action.