Panasonic AWE860N - COLOR CAMERA, Operating Instructions Manual

Page: 123 / 136

-51-
8 G/L, Color Bar Set Display
] Horizontal Phase Adjustment [H Phase: –206 to +49]
Horizontal phase can be adjusted when a genlock signal
is supplied.
^ Subcarrier Phase Coarse Adjustment
[SC Coarse: 1, 2, 3, 4]
Coarse adjustment of subcarrier phase can be made
when a genlock signal is supplied.
_
Subcarrier Phase Fine Adjustment
[SC Fine: –511 to +511]
Fine adjustment of subcarrier phase can be made when a
genlock signal is supplied.
` Color Bar Setup Setting
[Color Bar Set: 0.0 IRE, 7.5 IRE]
The setup level of color bar can be adjusted.
a Color Bar Setup Setting for the optional cards
[Color Bar Set2: 0.0 IRE, 7.5 IRE]
This menu is displayed when the optional card to process
video signals is inserted.
The setup level of color bar to output to the optional card
can be adjusted.
Set 0.0 IRE when the SDI card is inserted.
9 Detail Set Display
b Detail Level Setting [Detail: OFF, Low, High]
Contour correction quantity can be selected.
Detail settings made using the Horizontal/Vertical Detail
Level High/Low Setting.
c
Horizontal Detail Level High Setting
[H Detail Level H: L+1 to 63]
d Vertical Detail Level High Setting
[V Detail Level H: L+1 to 31]
e Horizontal Detail Level Low Setting
[H Detail Level L: 0 to H–1]
f Vertical Detail Level Low Setting
[V Detail Level L: 0 to H–1]
Detail level can be set in horizontal (H) and vertical (V)
directions with the Detail Level Setting at High or Low.
Whichever the direction, H or V, the set level at High
must be at least one position higher than that at Low.
g Detail Band Setting [Detail Band: 1 to 5]
A contour correction band can be set with the Detail
Level Setting at High or Low. The higher setting, the finer
will be the detail.