manualshive.com logo in svg

Panasonic AW-UE50WP, Operating Instructions Manual, Page: 96 / 154

Share
Download
Panasonic AW-UE50WP Operating Instructions Manual Download Page 96

Unicast address(IPv4)

Sets the Unicast address used for MPEG2-TS over UDP 

transmission.

Specify this IP address on the receiving application or service.

Factory settings:

 192.168.0.3

Unicast Port [1024 to 50000]

Sets the Unicast port number used for MPEG2-TS over UDP 

transmission.

Specify this port number on the receiving application or service.

Factory settings:

 7002

Multicast address(IPv4)

Sets the Multicast address used for MPEG2-TS over UDP 

transmission.

Specify this IP address on the receiving application or service.

Factory settings:

 239.192.0.20

Multicast Port [1024 to 50000]

Sets the Multicast port number used for MPEG2-TS over UDP 

transmission.

Specify this port number on the receiving application or service.

Factory settings:

 32004

Multicast TTL/HOPLimit

The same as H.264 Multicast TTL/HOPLimit (→ page 92).

Push UDP [Enable, Disable]

When Push UDP has been set to Enable, MPEG2-TS over UDP 

transmission starts automatically when the camera is started.

Factory settings:

 Enable

Streaming format

Make settings for H.264 images used for MPEG2-TS over UDP 

transmission.

The setting is confirmed with the [Set] button.

Refer to the description of H.264 (→ page 91) for information about 

Image capture size, Frame rate, and Max bit rate(per client).

<NOTE>

• Streaming format settings cannot be changed during MPEG2-TS 

over UDP transmissions.

„

z

NDI|HX V2

Make NDI|HX V2 transmission settings.

The setting is confirmed with the [Set] button.

NDI|HX V2

<NOTE>

• This unit restarts when [Streaming mode] is changed to [NDI|HX 

V2], or when changed from [NDI|HX V2] to another mode.

Source name

Sets the device name displayed when this unit is detected by software 

applications and hardware compatible with NDI|HX.

Factory settings:

 NDI_Device-[serial number of this unit]

Maximum number 

of characters

1 to 32 characters

Characters that 

can be entered

Alphanumeric characters, symbols: - _

Protocol [TCP, UDP]

Sets the format of unicast transmission to be used.

Factory settings:

 TCP

Multicast Transmit [On, Off]

Sets whether to perform multicast transmissions of images for 

software applications and hardware that are compatible with NDI.

Factory settings:

 Off

Address(IPv4) [IPv4 : 244.0.0.0 to 239.255.255.255]

Enter he multicast IP address.

Images and audio are transmitted to the specified multicast address.

Factory settings: 

239.192.0.30

<NOTE>

• Check the multicast IP addresses available for use before 

entering.

96

Web screen configurations  (continued)

Summary of Contents for AW-UE50WP



























































































































































Reviews:

No comments