manualshive.com logo in svg

Panasonic AW-UE50WP, Operating Instructions Manual, Page: 66 / 154

Share
Download
Panasonic AW-UE50WP Operating Instructions Manual Download Page 66

HDMI Status screen

     HDMI Status

 Connect                    

　HDMI

 Format                2160/29.97p

 Video Sampling  YPbPr 4:2:2/10bit

 Monitor                 Available

 

 

 

 Return

Connect

Displays the connection status of the HDMI connector.

One of the following is displayed according to the product 

specifications of the device or monitor connected.

Unconnect

Not connected.

HDMI

Connected via HDMI.

DVI

Connected via DVI.

Format

Displays the format of the images being output via the HDMI 

connector.

The same format is displayed as is specified in [Format] in [HDMI] in 

the [Output 1/5] screen.

Video Sampling

The video sampling of the images being output via the HDMI 

connector is displayed.

One of the following is displayed according to the menu settings and 

the product specifications of the device or monitor connected.

– – –

Displayed when [Connect] is other than HDMI.

RGB 8bit

Displayed when [Connect] is HDMI and output is RGB 

8bit.

YPbPr 4:2:2/ 

10bit

Displayed when [Connect] is HDMI and output is 

YPbPr 4:2:2/10bit.

Monitor

Displays the status of the device or monitor connected to the HDMI 

connector.

One of the following is displayed according to the product 

specifications of the device or monitor connected.

– – –

Displayed when [Connect] is other than HDMI.

Available

This indicates that [Connect] is HDMI and the 

device or monitor connected supports the format 

output by this unit.

Unsupport UHD

This indicates that [Connect] is HDMI and the 

device or monitor connected does not support the 

format output by this unit.

Unsupport Format This indicates that [Connect] is HDMI and the 

device or monitor connected is not supported for a 

reason other than those shown above.

Return

Return to the previous menu level.

Error Status screen

     Error Status

 Lens                     No Error

 Pan/Tilt                 No Error

 Temperature              No Error

 

 

 

 

 Return

Lens [No Error, Error]

This displays the error status of the lens.

No Error

The lens is operating normally.

Error

A lens error has occurred.

Pan/Tilt [No Error, Error]

This displays the error status of the pan-tilt drive section.

No Error

The pan-tilt drive section is operating normally.

Error

A pan-tilt drive section error has occurred.

Temperature [No Error, High Temperature, Sensor Error]

This displays the status of temperature related errors.

No Error

Within normal operating temperature range.

High 

Temperature

Temperature is high.

Sensor Error

The temperature sensor may have malfunctioned.

<NOTE>

• When the above errors occur, notification of the errors are sent via 

IP/serial to the external device (AW-RP150 or AW-RP60, etc.), so 

these errors can be displayed on the external device.

Return

Return to the previous menu level.

66

Camera menu items  (continued)

Summary of Contents for AW-UE50WP



























































































































































Reviews:

No comments