manualshive.com logo in svg

Panasonic AW-UE50WP, Operating Instructions Manual, Page: 53 / 154

Share
Download
Panasonic AW-UE50WP Operating Instructions Manual Download Page 53

Matrix 5/5 screen

     Matrix 5/5 

            [Color Correction 3/3]

           Saturation        Phase

 G_Cy              0            0 

 Cy                0            0 

 Cy_B              0            0 

 B                 0            0 

 Return

Color Correction 3/3

This can be set when [User] has been selected as the [Matrix Type] 

setting.

Adjust the saturation and hue.

Saturation [–63 to +63]

Adjust the saturation for each color.

Phase [–63 to +63]

Adjust the hue for each color.

G_Cy

Color between green and cyan

Cy

Cyan

Cy_B

Color between cyan and blue

B

Blue

<NOTE>

• If the [Matrix Type] is set to other than [User], the preset settings are 

displayed.

Return

Return to the previous menu level.

Lens screen

     Lens 

 Focus Mode                   Auto

 AF Sensitivity             Normal

 Zoom Mode                Opt.Zoom

  Max Digital Zoom             x10

 Digital Extender              Off

 O.I.S. Mode                   Off 

  

  

  

 Return

Focus Mode [Auto, Manual]

Select auto or manual mode for the focus adjustment function.

Auto

Always adjust focus automatically.

Manual

Adjust focus manually.

AF Sensitivity [Normal, Stable]

Select the conformability mode for auto focusing function.

Normal

Focusing is with a standard conformability.

Stable 

Focusing is with a priority placed on stability.

Zoom Mode [Opt.Zoom, i.Zoom, D.Zoom]

Set the maximum magnification rate for zoom.

Opt.Zoom

Use only optical zoom.

Optical zoom up to 24× is possible.

i.Zoom

Enable the i.Zoom function.

When this function is enabled, digital zoom is used while 

reducing image degradation.

When [Format] in the [System] screen is 2160/29.97p, 

2160/25p, 2160/24p, 2160/23.98p

Up to 28× zoom is possible combining optical zoom and 

digital zoom.

•  When [Format] in the [System] screen is other than one 

of these, up to 36× zoom is possible combining optical 

zoom and digital zoom.

D.Zoom

Enable the digital zoom function.

Higher digital zoom magnifications will result in coarser 

images.

Max Digital Zoom  

[×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10]

Set the maximum digital zoom magnification.

This is only enabled when [Zoom Mode] is set to [D.Zoom].

<NOTE>

• Higher digital zoom magnifications will result in coarser images.

Digital Extender [Off, ×1.4, ×2.0]

Make settings for the digital extender function.

Off

Turn the digital extender function off.

×1.4

The digital zoom will be fixed at 1.4×.

×2.0

The digital zoom will be fixed at 2.0×.

This is only enabled when [Zoom Mode] is set to [Opt.Zoom].

52

53

Camera menu items  (continued)

Summary of Contents for AW-UE50WP



























































































































































Reviews:

No comments