Panasonic AW-UE50WP Operating Instructions Manual Download Page 132

Page: 132 / 154

Preset operation screen for touch panels

Preset operation area for touch panels

This is the area where buttons for preset operations are located that

are suitable for use with touch panels.

The functionality of the operation buttons is the same as the buttons

displayed in the usual live screen.

Image adjust operation screen for touch panels

10.

Image adjust operation area for touch panels

This is the area where buttons for iris, gain, balance adjustments,

shutter, and scene operations are located that are suitable for use

with touch panels.

The functionality of the operation buttons is the same as the buttons

displayed in the usual live screen.

Setup operation area for touch panels

Even when the Setup screen is displayed, it is possible to display a

Setup menu that is suitable for use with touch panels.

The functionality of the operation buttons is the same as the buttons

displayed in the usual live screen.

132

Displaying the web screen using a personal computer equipped with a touch panel (continued)

Summary of Contents for AW-UE50WP



























































































































































Search results

Summary of Contents for AW-UE50WP

Reviews:

Panasonic AW-UE50WP, Operating Instructions Manual, Page: 132 / 154

Search results

Summary of Contents for AW-UE50WP

Reviews: