Panasonic AW-UE50WP, Operating Instructions Manual, Page: 113 / 154

Recommended network setting for internet
Perform the recommended settings to connect the camera to the
Internet.
When the [Execute] button is clicked, a dialog box will be displayed.
To execute, click the [OK] button.
• [JPEG/H.264] in the Image screen [Image/Audio]
When “Streaming mode” is set to “H.264”
JPEG(1)
Image capture size: 640×360
JPEG(2)
Image capture size: 320×180
JPEG(3)
Off
H.264(1) • H.264(2) • H.264(3)
Internet mode(Over HTTP): On
Transmission priority: Best effort
H.264(1)
Image capture size: 1920×1080
Max bit rate(per client): Max8192kbps, Min2048kbps
H.264(2)
Image capture size: 640×360
Max bit rate(per client): Max4096kbps, Min1024kbps
H.264(3)
Image capture size: 320×180
Max bit rate(per client): Max4096kbps, Min512kbps
H.264(4)
H.264 transmission: Off
When “Streaming mode” is set to “H.265”
JPEG(1)
Image capture size: 640×360
JPEG(2)
Image capture size: 320×180
JPEG(3)
Off
H.265(1)
Max bit rate(per client): Max8192kbps
Frame rate: 30fps/25fps/24fps
H.265(2)
Max bit rate(per client): Max4096kbps
Frame rate: 30fps/25fps/24fps
• [Network] in the Network setup screen [Network]
Common IPv6/v4
Max RTP packet size: Limited-1280byte
HTTP max segment size (MSS): Limited(1280byte)
Check active network setting
You can check the information about the Network settings (IPv4, IPv6,
DNS) enabled on the unit.
A pop-up window is displayed when you click the [Confirm] button.
<NOTE>
• There is an IP address set manually and an IP address acquired
by DHCP displayed for each of [IPaddress 1(IPv6)] and [IPaddress
2(IPv6)].
112 113
Web screen configurations (continued)