Panasonic AW-UE50WP Operating Instructions Manual Download Page 108

Page: 108 / 154

User management screen [User mng.]

The users and personal computers (IP addresses) that can access the

unit from personal computers and mobile terminals are registered in the

User management screen [User mng.].

The User management screen [User mng.] consists of [User auth.] and

[Host auth.].

User authentication screen [User auth.]

Click the [User auth.] of User management screen [User mng.].

Configure the user authentication settings for the personal computers

and mobile terminals that can access the unit.

Up to 9 users can be registered.

<NOTE>

• If user authentication fails more than 8 times within a 30-second period

from the same IP address (personal computer), access to the unit will

be disabled for a certain period.

Setting status

The current user authentication settings and user authentication method

are displayed. The currently registered account information is also

displayed.

Mode

User auth. [On, Off]

User authentication is set to [On] or [Off] here.

The setting is confirmed with the [Set] button.

Factory settings:

Off

Authentication [Basic, Digest]

Specify the method of user authentication to use.

The setting is confirmed with the [Set] button.

Basic

Use basic authentication.

Digest

Use digest authentication.

Factory settings:

Digest

Preset Zoom Mode [Mode A, Mode B]

Select the zoom operation for when preset memory is recalled.

Mode A

Perform the zoom operation in line with the pan/tilt

operation.

Mode B

Perform the zoom operation quicker than the pan/tilt

operation.

Factory settings:

Mode A

Freeze During Preset [Off, On]

Turn the function for freezing images during preset playback off/on.

When this is set to [On], preset playback is performed with a still of

the image immediately preceding the start of preset playback being

output. The image freeze is released when preset playback is finished.

Factory settings:

Off

Collaboration capability [Linkage]

P2 Cast connection setting screen [P2 Cast]

Sets whether to enable or disable connection to P2 Cast, as well as the

destination server URL and the user account.

The setting is confirmed with the [Set] button.

Mode [On, Off]

Sets whether to connect this unit to P2 Cast via a network.

Factory settings:

Off

Cloud URL

Sets the server URL of P2 Cast to be connected when [Mode] is [On].

<NOTE>

• You can set the URL with maximum 512 characters.

User ID

Sets the user ID for connection to P2 Cast when [Mode] is [On].

Password

Sets the password for connection to P2 Cast when [Mode] is [On].

108

Web screen configurations (continued)

Summary of Contents for AW-UE50WP



























































































































































Search results

Summary of Contents for AW-UE50WP

Reviews:

Panasonic AW-UE50WP, Operating Instructions Manual, Page: 108 / 154

Search results

Summary of Contents for AW-UE50WP

Reviews: